The truck was repainted in its current shade of matte green following rust repair and replacement of the inner and outer rocker panels. Features include a fold-down windshield, a beige removable hardtop, custom front and rear bumpers, and running boards as well as LED headlights, front light bar, taillights, and reverse lights. Line-X protective coating was applied to the hardtop, bumpers, and running boards. A dent on the left-rear corner and a chip on the passenger door’s rear…
The truck was repainted in its current shade of matte green following rust repair and replacement of the inner and outer rocker panels. Features include a fold-down windshield, a beige removable hardtop, custom front and rear bumpers, and running boards as well as LED headlights, front light bar, taillights, and reverse lights. Line-X protective coating was applied to the hardtop, bumpers, and running boards. A dent on the left-rear corner and a chip on the passenger door’s rear edge are noted.
ProComp 15″ wheels are finished in black and are wrapped in 33×13.50″ Toyo M/T Open Country tires, which were mounted in April 2020. Equipment includes Warn manually locking front hubs, front disc brakes, and a lift kit. A removable tire carrier mounted at the rear is shown in some accompanying photos. The steering gearbox was replaced along with the brake master cylinder, lines, and rear drums, cylinders, and springs.
The cabin features Corbeau front seats and a rear bench upholstered in beige vinyl along with a body-color dashboard and doors. A roll bar is installed, and Line-X protective coating was applied to metal surfaces including the seat bases. A chip is noted on the passenger-side doorsill.
A Grant steering wheel fronts an 80-mph speedometer, gauges for coolant temperature and fuel level, and warning lights for amperage and oil pressure. The five-digit odometer shows 1k miles, which approximately reflects the distance added under current ownership. True chassis mileage is unknown.
The 152ci inline-four features a replacement carburetor and an aluminum radiator. Work conducted during the refurbishment consisted of overhauling the engine in addition to replacing the intake and exhaust valves, head and block gaskets, water pump, spark plugs, fuel lines, and wiring harness. An oil change was performed in August 2022.
Power is sent to the rear or all four wheels through a rebuilt three-speed manual transmission and a dual-range transfer case. The refurbishment included replacement of the clutch, pilot bearing, throw-out bearing, front and rear axle seals and bearings, and transfer-case seals. A custom exhaust system was fitted, and the seller states that the underside received a rustproofing treatment.